Home · Forums · About Us

 

Welcome to QuickPCI POST Diagnostic Card With the QuickPCI POST Card, you now have an efficient, high quality and easy to operate diagnostic card at your disposal. This was designed for the PCI bus system, which has become standard and even enables you to diagnose "dead" PC's quickly. "Dead PC's" are no longer a problem with the QuickPCI POST Card, and neither are those time consuming intermittent power supply problems. Do you want to know more about the ATX timing or the PCI? Simply get plugged in. QuickPCI POST Card also comes with a 6 months manufacture warranty.   PCI Interface As for the interface of the PCI bus, the QuickPCI POST Card was designed with a fast and programmable PLD-chip, which takes over decoding and monitoring of various bus signals. A special consideration during development was not only high functionality but also the future reliability of the design.   Power On Self Test (POST) Display QuickPCI POST Card features a 2-digit-hexadecimal-display. The extra bright display can even be read easily in dim light and features the monitoring of I/O Port address 80h, which is used in sequence from BIOS of PC booting to out put of POST codes. If the BIOS failed to boot, possibly due to a hard ware problem, the corresponding POST error code will give you information about the cause of the problem.   Bus Tension Control To control the PCI bus tension, QuickPCI POST Card offers a variety of ways. Four LED's show the existing voltage +5V, +12V , -12V and 3.3 Volt.   Reset and Clock Signal Monitoring To monitor the bus signal and reset line (PCI clock) the clock signal is under continuous monitoring of its two possible states ("0" logical low and "1" logical high). Simpler diagnostic boards often only check the first cycle of the clock and reset signal. QuickPCI POST Card shows the actual states of clock and reset signals using LED's. By using the PCI reset signal, any PC hardware device (chipset, cpu, graphics controller, and etc.) is reset to a defined state. A hardware failure on the mainboard or an add on card can cause the reset signal to stick to its active state. This event is called "Reset Loop" and prevents the PC system from booting. Reset Loops can be detected by watching the reset LED status.   Feature Overview • Extra bright POST-display • Jumperless and easy to operate design • Real time monitoring of clock and reset signal • LED display for +12 , - 12v, 3.3v and 5v bus voltages • Gold overlay of all mechanical contacts • 6 months warranty   Purchase Information: Retail Your Price QuickPCI POST Card $39.00 $29.00